Quotation for cranes and goods lift from The Portuguese Republic
Keyword：cranes and goods lift Time：2021-5-3 17:02:50
Customer: Dear Mr. Yang,
We hereby request quotation for different type of crane & Goods lift for our factory in Angola.
So please go through the attached BOQ with technical details for your understanding and provide us your valuable FOB quotation for the same as earliest as possible.
Also please send technical data sheet and volumes and weights.
| EOT, Hoist Summary Sheet | ||||||
| Sr. No | DESCRIPTIONS | UOM | QTY | UNIT PRICE (RS.) | Erection Price (Rs.) | TOTAL AMOUNTS (RS.) |
| 1 | BASIC COST OF DESIGN, MANUFACTURING, SUPPLY OF MONORAIL HOIST OF CAPACITY – 5T. | NOS. | 1 | 0 | ||
| 2 | BASIC COST OF DESIGN, MANUFACTURING, SUPPLY OF MONORAIL HOIST OF CAPACITY – 3 T. | NOS. | 1 | 0 | ||
| 3 | BASIC COST OF DESIGN, MANUFACTURING, SUPPLY OF SG EOT CRANE CAPACITY – 1 T | NOS. | 2 | 0 | ||
| 4 | BASIC COST OF REMOTE CONTROL FOR SG EOT CRANE | NOS. | 2 | 0 | ||
| 5 | GOODS CUM PASSENGER LIFT -2 TON | NOS. | 2 | 0 | ||
| 6 | DSL (SHROUDED BUS BAR GI COND ) | MTRS. | 62 | 0 | ||
| 7 | BASIC COST OF CURRENT COLLECTOR | SET | 4 | 0 | ||
| Total Amount Rs. | 0 | |||||
| 5 Ton Single Girder Monorail Hoist Technical Specification | ||||||
| Sr. No. | DESCRIPTION | SPECIFICATION | Vendor Specs. If Deviates | Name of the Brand proposed by vendor | ||
| Standard Scope of Supply:- | ||||||
| 1 | Type | Electric Wire Rope Hoist – Single Girder Monorail | ||||
| 2 | Make | As per manufacturer specs To be provided by Vendor | ||||
| 3 | Model No. | As per manufacturer specs To be provided by Vendor | ||||
| 4 | Load Capacity (Kg) | 5000 | ||||
| 5 | Travel Height (m) | Approx. 12 | ||||
| 6 | Travel Length (m) | Approx. 20 | ||||
| 7 | Control | Pendent box and remote both | ||||
| 8 | Lifting Speed (VFD) (m/min) | 1~4 or as per manufacturer design | ||||
| 9 | Class of Duty | FEM | 2m | |||
| 10 | ISO | M5 | ||||
| 11 | Reeving | 4/1 | ||||
| 12 | Height Of Clear Lift (m) | 12 | ||||
| 13 | Wheel Base (mm) | As per manufacturer specs To be provided by Vendor | ||||
| 14 | Hoist Weight (Kg) (Approx.) | As per manufacturer specs To be provided by Vendor | ||||
| 15 | Cross Travel Speed (m/min) | 5~20 | ||||
| 16 | Wheel Diameter (mm) | 100 | ||||
| 17 | Rope Diameter (mm) | 8 | ||||
| 18 | Runway Beam Width (mm) | Approx. 500 | ||||
| 19 | Head Room (mm) | Acc to manufacturer specs.( Not more than 600 mm) | ||||
| 20 | Ambient Temperature (°C) | 50 Max | ||||
| 21 | Application | outdoor (equipment to be protected using adequate cover) | ||||
| 22 | Voltage | 415Volts, 3 Phase, 50 Hz, AC Supply | ||||
| 23 | Control Supply | 24 Volts, DC Supply | ||||
| Lifting Motor Specification:- | ||||||
| 24 | Power (kW) | As per manufacturer specs To be provided by Vendor | ||||
| 25 | Thermal Insulation Class | F - Class | ||||
| 26 | Enclosure | IP 55 However all motor to be protected using cover | ||||
| 27 | Brake Type | Electromagnetic Disc Brake | ||||
| Travel Motor Specification:- | ||||||
| 28 | Power (kW) | As per manufacturer specs To be provided by Vendor | ||||
| 29 | Thermal Insulation Class | F - Class | ||||
| 30 | Enclosure | IP 55 However all motor to be protected using cover | ||||
| 31 | Brake Type | Electromagnetic Disc Brake | ||||
| 32 | Gear Box | Helical gear, Oil splash lubricated, fully enclosed type with Pinions and Gears, Hardened. Make: Make To be provided by vendor | ||||
| 33 | Hook | Single shank Swivelling type | ||||
| 34 | Control Panel | Electrical device of Contactors and MCB mounted in hoist panel box. (Thermal overload relay to be provided). | ||||
| 35 | Over Travel Limit | Rotary Limit Switch | ||||
| 36 | Over Load Protection | VFD (Electronic) | ||||
| 37 | Connectors | Plug in type for all electrical accrssories | ||||
| 38 | Electrical supply | DSL (Shrouded Bus bar GI conductor 40 ohms) | ||||
| 3 Ton Single Girder Monorail Hoist Technical Specification | |||||
| Sr. No. | DESCRIPTION | SPECIFICATION | Vendor Specs. If Deviates | Name of the Brand proposed by vendor | |
| Standard Scope of Supply:- | |||||
| 1 | Type | Electric Wire Rope Hoist – Single Girder Monorail | |||
| 2 | Make | To be provided by Vendor | |||
| 3 | Model No. | To be provided by Vendor | |||
| 4 | Load Capacity (Kg) | 3000 | |||
| 5 | Travel Height (m) | Approx. 5 | |||
| 6 | Travel Length (m) | Approx. 10 | |||
| 7 | Lifting Speed (VFD) (m/min) | 1.25~5 or as per manufacturer design | |||
| 8 | Class of Duty | FEM | 2m | ||
| 9 | ISO | M5 | |||
| 10 | Reeving | 4/1 | |||
| 11 | Height Of Clear Lift (m) | 9 | |||
| 12 | Wheel Base (mm) | As per manufacturer specs To be provided by Vendor | |||
| 13 | Hoist Weight (Kg) (Approx.) | As per manufacturer specs To be provided by Vendor | |||
| 14 | Cross Travel Speed (m/min) | 5~20 | |||
| 15 | Wheel Diameter (mm) | 100 | |||
| 16 | Rope Diameter (mm) | 6.5 | |||
| 17 | Runway Beam Width (mm) | Approx. 310 mm | |||
| 18 | Head Room (mm) | Acc to manufacturer specs.( Not more than 600 mm) | |||
| 19 | Ambient Temperature (°C) | 50 Max | |||
| 20 | Application | Indoor | |||
| 21 | Voltage | 415Volts, 3 Phase, 50 Hz, AC Supply | |||
| 22 | Control Supply | 24 Volts, DC Supply | |||
| Lifting Motor Specification:- | |||||
| 23 | Power (kW) | As per manufacturer specs To be provided by Vendor | |||
| 24 | Thermal Insulation Class | F - Class | |||
| 25 | Enclosure | IP 55 | |||
| 26 | Brake Type | Electromagnetic Disc Brake | |||
| Travel Motor Specification:- | |||||
| 27 | Power (kW) | As per manufacturer specs To be provided by Vendor | |||
| 28 | Thermal Insulation Class | F - Class | |||
| 29 | Enclosure | IP 55 | |||
| 30 | Brake Type | Electromagnetic Disc Brake | |||
| 31 | Gear Box | Helical gear, Oil splash lubricated, fully enclosed type with Pinions and Gears, Hardened. Make To be provided by vendor | |||
| 32 | Hook | Single shank Swivelling type. | |||
| 33 | Control Panel | Electrical device of Contactors and MCB mounted in hoist panel box. (Thermal overload relay to be provided) | |||
| 34 | Over Travel Limit | Rotary Limit Switch | |||
| 35 | Over Load Protection | VFD (Electronic) | |||
| 36 | Connectors | Plug In type for all electrical accessories | |||
| 37 | Paint | As per manufacturer specs. | |||
| 38 | Connectors | Plug in type for all electrical accrssories | |||
| 39 | Electrical supply | DSL (Shrouded Bus bar GI conductor 40 ohms) | |||
| 1 Ton Single Grider EOT Crane Technical Specification | ||||
| Sr. No. | DESCRIPTION | SPECIFICATION | Vendor Specs. If Deviates | Name of the Brand proposed by vendor |
| 1 | Type of crane | Single Girder EOT CRANE | ||
| 2 | Class of duty | Class-II (M5), as per IS : 3177, 807, 800 / As per DIN Standard 2M | ||
| 3 | Capacity | 1 T | ||
| 5 | Operating Environment | Indoor | ||
| 6 | Span | 15 M | ||
| 7 | Height of Lift : | 5 M | ||
| 8 | Crane Control | Independently movable mobile push button pendant along with remote control | ||
| 9 | SPEED | |||
| a. | Long travel | 2 - 20 MPM ( Through VVVFD ) As per manufacturer specs. | ||
| 10 | MOTOR | |||
| a. | Long travel | 2 x 0.75 KW Sq. Cage Geared Brake Motor.(All Motors are 4P, TEFC,40% CDF,150 Starts/hr, Class F Insulation, Temp rise limited to Class B & Protection IP-55) As per manufacturer specs. | ||
| 11 | BRAKES | LT:- EM DC Disc type / Brake Motor | ||
| 12 | LIMIT SWITCH | |||
| a. | Main Hoist | Electrical Limit switch | ||
| b. | Cross Travel | Two way lever type | ||
| c. | Long Travel | Two way lever type | ||
| 13 | CRANE CONTROLS | |||
| a. | Protective Panel | Consisting MCB Main line contactor, Step down transformer, Switch for supply | ||
| b. | Drive Panel | Consisting Contactor, MCB, Over Load Relays. Siemens / L&T / BCH or any Reputed make | ||
| 14 | CABLES | Multi Core, PVC Sheathed flexible type | ||
| a. | Make | POLYCAB | ||
| 15 | CURRENT COLLECTION | |||
| a. | Cross Travel | Through trailing cable on 4 – wheeled trolleys running on T Beam / C channel | ||
| b. | Long travel | Through shrouded bar (GI conductor type) | ||
| 16 | Power Supply | 415V,+/-10%, 3 phase, 50 Hz | ||
| 17 | Control Voltage | 110V AC,1phase, 50Hz | ||
| 18 | WHEELS | |||
| a. | Type | Single flange for CT & Double flange for LT | ||
| b. | Material | Forging EN-24 | ||
| c. | Type of bearings | Antifriction Ball/roller | ||
| 19 | Buffer | Rubber Buffer shall be provided for L.T | ||
| 20 | Painting | Two Coats of Zinc Chromate Primer followed by Two Coats of Golden Yellow Synthetic Enamel Paint of Berger / Nerolac / Any reputed make. | ||
| 21 | Safety | All Motors will be protected through bimetal overload relay. | ||
| 1 Ton Wire Rope Hoist Technical Specification | ||||
| Sr. No. | DESCRIPTION | SPECIFICATION | Vendor Specs. If Deviates | Name of the Brand proposed by vendor |
| Standard Scope of Supply:- | ||||
| 1 | Type | Electric Wire Rope Hoist – Single Girder Monorail | ||
| 2 | Make | To be provided by Vendor | ||
| 3 | Model No. | To be provided by Vendor | ||
| 4 | Load Capacity (Kg) | 1000 | ||
| 5 | Travel Height (m) | Approx. 5 | ||
| 6 | Travel Length (m) | Approx. 16 | ||
| 7 | Lifting Speed (VFD) (m/min) | 1.25~5 or as per manufacturer design | ||
| 8 | Class of Duty FEM | 2m | ||
| 9 | Class of Duty ISO | M5 | ||
| 10 | Reeving | 2/1 | ||
| 11 | Height Of Clear Lift (m) | 5 | ||
| 12 | Wheel Base (mm) | As per manufacturer specs To be provided by Vendor | ||
| 13 | Hoist Weight (Kg) (Approx.) | As per manufacturer specs To be provided by Vendor | ||
| 14 | Cross Travel Speed (m/min) | 25/6.25 | ||
| 15 | Wheel Diameter (mm) | As per manufacturer specs To be provided by Vendor | ||
| 16 | Rope Diameter (mm) | 6.0 | ||
| 17 | Runway Beam Width (mm) | Approx. 310 mm | ||
| 18 | Head Room (mm) | Acc to manufacturer specs.( Not more than 600 mm) | ||
| 19 | Ambient Temperature (°C) | 50 Max | ||
| 20 | Application | Indoor | ||
| 21 | Voltage | 415Volts, 3 Phase, 50 Hz, AC Supply | ||
| 22 | Control Supply | 24 Volts, DC Supply | ||
| Lifting Motor Specification:- | ||||
| 23 | Power (kW) | As per manufacturer specs To be provided by Vendor | ||
| 24 | Thermal Insulation Class | F - Class | ||
| 25 | Enclosure | IP 55 | ||
| 26 | Brake Type | Electromagnetic Disc Brake | ||
| Travel Motor Specification:- | ||||
| 27 | Power (kW) | As per manufacturer specs To be provided by Vendor | ||
| 28 | Thermal Insulation Class | F - Class | ||
| 29 | Enclosure | IP 55 | ||
| 30 | Brake Type | Electromagnetic Disc Brake | ||
| 31 | Gear Box | Enclosed type Helical gear, Oil splash lubricated, Make To be provided by vendor | ||
| 32 | Hook | Single shank Swivelling type. | ||
| 33 | Control Panel | Electrical device of Contactors and MCB mounted in hoist panel box. (Thermal overload relay to be provided) | ||
| 34 | Over Travel Limit | Rotary Limit Switch | ||
| 35 | Over Load Protection | VFD (Electronic) | ||
| 36 | Connectors | Plug In type for all electrical accessories | ||
| 37 | Paint | As per manufacturer specs. | ||
| 38 | Connectors | Plug in type for all electrical accrssories | ||
| 39 | Electrical supply | DSL (Shrouded Bus bar GI conductor 40 ohms) | ||
| 2 Ton Goods Cum Passenger Lift Technical Specification | ||||
| Sr. No. | DESCRIPTION | SPECIFICATION | Vendor Specs. If Deviates | Name of the Brand proposed by vendor |
| 1 | Type | Goods Cum passenger Lift | ||
| 2 | Make | To be provided by Vendor | ||
| 3 | Model No. | To be provided by Vendor | ||
| 4 | Load Capacity (Kg) | 2000 | ||
| 5 | Travel Height (m) | G (5.85 m) +1 (5.65 m) +M (4.2 m max height under roof which should include LMR as well) | ||
| 6 | No. of stops | 3 | ||
| 7 | No. of Openings | 3 (All on same Side) | ||
| 8 | Shaft vell size (prepared in RCC stroke block work by Client) | 3500/2000 (two lifts adjoining each other) | ||
| 9 | Lifting Speed (VFD) (m/min) | minimum 0.5 or as per manufacturer design | ||
| 10 | Pit Depth (mm) (prepared in RCC stroke block work by Client) | 1500 minimum | ||
| 11 | Door Type | Manual Door (SS 304 collapsable grill) with electrical safety and mechanical safety | ||
| 12 | No. of doors | 03 + 01 = 4 Nos. | ||
| 13 | Car Enclosure | SS 304 (1.2 mm thick) | ||
| 14 | Car Width * Car Length (minimum internal dimension) | 2800 * 1700 mm | ||
| 15 | Clear Car Entrance (complete door open condition) | 2500 * 2000 mm | ||
| 16 | Car Height (minimum internal dimension) | 2200 mm | ||
| 17 | Car Flooring | SS 304 (3 mm thick chequered plate) | ||
| 18 | Car Ceiling | SS 304 (1.2 mm thick with lights and fan) | ||
| 19 | Drive | Micro processor based VVVF | ||
| 20 | Position of Machinery | Directly above the lift well (open machine room) | ||
| 21 | Type of control system | Micro processor based simplex selective collective control with / without attendant | ||
| 22 | Electric supply | AC 400/440 Volts, 3 Phase, 50 cycles | ||
| 23 | Wire Rope dia | 12 mm minimum. 6 * 36 usha martin make 4 fall | ||
| 24 | Max clear height after last landing | 4.2 meters (this includes machine room) | ||
| 25 | Digital UP/DN Arrow Position Indicator All Landings | As per manufacturer specs and design | ||
| 26 | Luminious Call Indicator | All landing floors | ||
| 27 | Door Open Bell | If the car or landing door is open | ||
| 28 | Fault indicator in Control Panel | all display shouldshow | ||
| 29 | Button operation | As per manufacturer specs and design | ||
| 30 | Over Speed Protection | if the speed is increased by any reason like rope break, brake failure the overspeed governer safety should lock the cabin at same position and should off the electric control panel as per IS 14665. | ||
| 31 | Single phase Protection | As per manufacturer specs and design. As per IS 14665 | ||
| 32 | Phase Failure protection | As per manufacturer specs and design. As per IS 14666 | ||
| 33 | Final and Terminal limit switch | As per manufacturer specs and design. As per IS 14667 | ||
| 34 | Emergency stop Watch | As per manufacturer specs and design. As per IS 14668 | ||
| 35 | Interlocking switches | As per manufacturer specs and design. As per IS 14669 | ||
| 36 | Reverse phase protection | As per manufacturer specs and design. As per IS 14670 | ||
| 37 | Lift should not operate if any gates not closed properly | To be provided | ||
| 38 | Light indication showing gates in open condition | To be provided | ||
| 39 | Break releasing lever and de-locking key for emergency escape during breakdown/power failure | To be provided | ||
RAMHOIST: pls check the offer below：
| EOT, Hoist Summary Sheet | ||||||
| Sr. No | DESCRIPTIONS | UOM | QTY | UNIT PRICE (USD) | Erection Price (USD) | TOTAL AMOUNTS (USD) |
| 1 | BASIC COST OF DESIGN, MANUFACTURING, SUPPLY OF MONORAIL HOIST OF CAPACITY – 5T. | NOS. | 1 | 3700 | 3700 | |
| 2 | BASIC COST OF DESIGN, MANUFACTURING, SUPPLY OF MONORAIL HOIST OF CAPACITY – 3 T. | NOS. | 1 | 2600 | 2600 | |
| 3 | BASIC COST OF DESIGN, MANUFACTURING, SUPPLY OF SG EOT CRANE CAPACITY – 1 T | NOS. | 2 | 11000 | 22000 | |
| 4 | BASIC COST OF REMOTE CONTROL FOR SG EOT CRANE | NOS. | 2 | 240.00 | 480 | |
| 5 | GOODS CUM PASSENGER LIFT -2 TON | NOS. | 2 | n/a | 0 | |
| 6 | DSL (SHROUDED BUS BAR GI COND ) | MTRS. | 62 | 1530.00 | 94860 | |
| 7 | BASIC COST OF CURRENT COLLECTOR | SET | 4 | 23.00 | 92 | |
| Total Amount USD | 123732 | |||||
| 5 Ton Single Girder Monorail Hoist Technical Specification | ||||||
| Sr. No. | DESCRIPTION | SPECIFICATION | Vendor Specs. If Deviates | Name of the Brand proposed by vendor | ||
| Standard Scope of Supply:- | ||||||
| 1 | Type | Electric Wire Rope Hoist – Single Girder Monorail | ||||
| 2 | Make | As per manufacturer specs To be provided by Vendor | SHA8 | |||
| 3 | Model No. | As per manufacturer specs To be provided by Vendor | SHA8 | |||
| 4 | Load Capacity (Kg) | 5000 | OK | |||
| 5 | Travel Height (m) | Approx. 12 | OK | |||
| 6 | Travel Length (m) | Approx. 20 | OK | |||
| 7 | Control | Pendent box and remote both | OK | |||
| 8 | Lifting Speed (VFD) (m/min) | 1~4 or as per manufacturer design | 5/0.8 | |||
| 9 | Class of Duty | FEM | 2m | OK | ||
| 10 | ISO | M5 | OK | |||
| 11 | Reeving | 4/1 | OK | |||
| 12 | Height Of Clear Lift (m) | 12 | 12 | |||
| 13 | Wheel Base (mm) | As per manufacturer specs To be provided by Vendor | 180-500 | |||
| 14 | Hoist Weight (Kg) (Approx.) | As per manufacturer specs To be provided by Vendor | 600 | |||
| 15 | Cross Travel Speed (m/min) | 5~20 | 20/5 | |||
| 16 | Wheel Diameter (mm) | 100 | 125 | |||
| 17 | Rope Diameter (mm) | 8 | 9 | |||
| 18 | Runway Beam Width (mm) | Approx. 500 | OK | |||
| 19 | Head Room (mm) | Acc to manufacturer specs.( Not more than 600 mm) | 550 | |||
| 20 | Ambient Temperature (°C) | 50 Max | OK | |||
| 21 | Application | outdoor (equipment to be protected using adequate cover) | OK | |||
| 22 | Voltage | 415Volts, 3 Phase, 50 Hz, AC Supply | OK | |||
| 23 | Control Supply | 24 Volts, DC Supply | OK | |||
| Lifting Motor Specification:- | ||||||
| 24 | Power (kW) | As per manufacturer specs To be provided by Vendor | 7.6/1.1 | |||
| 25 | Thermal Insulation Class | F - Class | OK | |||
| 26 | Enclosure | IP 55 However all motor to be protected using cover | OK | |||
| 27 | Brake Type | Electromagnetic Disc Brake | OK | |||
| Travel Motor Specification:- | ||||||
| 28 | Power (kW) | As per manufacturer specs To be provided by Vendor | 0.55/0.13 | |||
| 29 | Thermal Insulation Class | F - Class | OK | |||
| 30 | Enclosure | IP 55 However all motor to be protected using cover | OK | |||
| 31 | Brake Type | Electromagnetic Disc Brake | OK | |||
| 32 | Gear Box | Helical gear, Oil splash lubricated, fully enclosed type with Pinions and Gears, Hardened. Make: Make To be provided by vendor | OK | |||
| 33 | Hook | Single shank Swivelling type | OK | |||
| 34 | Control Panel | Electrical device of Contactors and MCB mounted in hoist panel box. (Thermal overload relay to be provided). | OK | |||
| 35 | Over Travel Limit | Rotary Limit Switch | OK | |||
| 36 | Over Load Protection | VFD (Electronic) | OK | |||
| 37 | Connectors | Plug in type for all electrical accrssories | OK | |||
| 38 | Electrical supply | DSL (Shrouded Bus bar GI conductor 40 ohms) | OK | |||
| 3 Ton Single Girder Monorail Hoist Technical Specification | |||||
| Sr. No. | DESCRIPTION | SPECIFICATION | Vendor Specs. If Deviates | Name of the Brand proposed by vendor | |
| Standard Scope of Supply:- | |||||
| 1 | Type | Electric Wire Rope Hoist – Single Girder Monorail | |||
| 2 | Make | To be provided by Vendor | SHA8 | ||
| 3 | Model No. | To be provided by Vendor | SHA8 | ||
| 4 | Load Capacity (Kg) | 3000 | OK | ||
| 5 | Travel Height (m) | Approx. 5 | ? | ||
| 6 | Travel Length (m) | Approx. 10 | OK | ||
| 7 | Lifting Speed (VFD) (m/min) | 1.25~5 or as per manufacturer design | 5/0.8 | ||
| 8 | Class of Duty | FEM | 2m | OK | |
| 9 | ISO | M5 | OK | ||
| 10 | Reeving | 4/1 | OK | ||
| 11 | Height Of Clear Lift (m) | 9 | 9 | ||
| 12 | Wheel Base (mm) | As per manufacturer specs To be provided by Vendor | 180-400 | ||
| 13 | Hoist Weight (Kg) (Approx.) | As per manufacturer specs To be provided by Vendor | 600 | ||
| 14 | Cross Travel Speed (m/min) | 5~20 | 20/5 | ||
| 15 | Wheel Diameter (mm) | 100 | OK | ||
| 16 | Rope Diameter (mm) | 6.5 | 9 | ||
| 17 | Runway Beam Width (mm) | Approx. 310 mm | OK | ||
| 18 | Head Room (mm) | Acc to manufacturer specs.( Not more than 600 mm) | 470 | ||
| 19 | Ambient Temperature (°C) | 50 Max | OK | ||
| 20 | Application | Indoor | OK | ||
| 21 | Voltage | 415Volts, 3 Phase, 50 Hz, AC Supply | OK | ||
| 22 | Control Supply | 24 Volts, DC Supply | OK | ||
| Lifting Motor Specification:- | |||||
| 23 | Power (kW) | As per manufacturer specs To be provided by Vendor | 3.2/0.45 | ||
| 24 | Thermal Insulation Class | F - Class | OK | ||
| 25 | Enclosure | IP 55 | OK | ||
| 26 | Brake Type | Electromagnetic Disc Brake | OK | ||
| Travel Motor Specification:- | |||||
| 27 | Power (kW) | As per manufacturer specs To be provided by Vendor | 0.37/0.1 | ||
| 28 | Thermal Insulation Class | F - Class | OK | ||
| 29 | Enclosure | IP 55 | OK | ||
| 30 | Brake Type | Electromagnetic Disc Brake | OK | ||
| 31 | Gear Box | Helical gear, Oil splash lubricated, fully enclosed type with Pinions and Gears, Hardened. Make To be provided by vendor | OK | ||
| 32 | Hook | Single shank Swivelling type. | OK | ||
| 33 | Control Panel | Electrical device of Contactors and MCB mounted in hoist panel box. (Thermal overload relay to be provided) | OK | ||
| 34 | Over Travel Limit | Rotary Limit Switch | OK | ||
| 35 | Over Load Protection | VFD (Electronic) | OK | ||
| 36 | Connectors | Plug In type for all electrical accessories | OK | ||
| 37 | Paint | As per manufacturer specs. | OK | ||
| 38 | Connectors | Plug in type for all electrical accrssories | OK | ||
| 39 | Electrical supply | DSL (Shrouded Bus bar GI conductor 40 ohms) | OK | ||
| 1 Ton Single Grider EOT Crane Technical Specification | ||||
| Sr. No. | DESCRIPTION | SPECIFICATION | Vendor Specs. If Deviates | Name of the Brand proposed by vendor |
| 1 | Type of crane | Single Girder EOT CRANE | ||
| 2 | Class of duty | Class-II (M5), as per IS : 3177, 807, 800 / As per DIN Standard 2M | OK | |
| 3 | Capacity | 1 T | OK | |
| 5 | Operating Environment | Indoor | OK | |
| 6 | Span | 15 M | OK | |
| 7 | Height of Lift : | 5 M | OK | |
| 8 | Crane Control | Independently movable mobile push button pendant along with remote control | OK | |
| 9 | SPEED | |||
| a. | Long travel | 2 - 20 MPM ( Through VVVFD ) As per manufacturer specs. | 20/5 M/MIN | |
| 10 | MOTOR | |||
| a. | Long travel | 2 x 0.75 KW Sq. Cage Geared Brake Motor.(All Motors are 4P, TEFC,40% CDF,150 Starts/hr, Class F Insulation, Temp rise limited to Class B & Protection IP-55) As per manufacturer specs. | 2*0.55KW | |
| 11 | BRAKES | LT:- EM DC Disc type / Brake Motor | OK | |
| 12 | LIMIT SWITCH | |||
| a. | Main Hoist | Electrical Limit switch | OK | |
| b. | Cross Travel | Two way lever type | OK | |
| c. | Long Travel | Two way lever type | OK | |
| 13 | CRANE CONTROLS | |||
| a. | Protective Panel | Consisting MCB Main line contactor, Step down transformer, Switch for supply | OK | |
| b. | Drive Panel | Consisting Contactor, MCB, Over Load Relays. Siemens / L&T / BCH or any Reputed make | OK | |
| 14 | CABLES | Multi Core, PVC Sheathed flexible type | OK | |
| a. | Make | POLYCAB | OK | |
| 15 | CURRENT COLLECTION | |||
| a. | Cross Travel | Through trailing cable on 4 – wheeled trolleys running on T Beam / C channel | OK | |
| b. | Long travel | Through shrouded bar (GI conductor type) | OK | |
| 16 | Power Supply | 415V,+/-10%, 3 phase, 50 Hz | OK | |
| 17 | Control Voltage | 110V AC,1phase, 50Hz | OK | |
| 18 | WHEELS | |||
| a. | Type | Single flange for CT & Double flange for LT | OK | |
| b. | Material | Forging EN-24 | OK | |
| c. | Type of bearings | Antifriction Ball/roller | OK | |
| 19 | Buffer | Rubber Buffer shall be provided for L.T | OK | |
| 20 | Painting | Two Coats of Zinc Chromate Primer followed by Two Coats of Golden Yellow Synthetic Enamel Paint of Berger / Nerolac / Any reputed make. | OK | |
| 21 | Safety | All Motors will be protected through bimetal overload relay. | OK | |
| 1 Ton Wire Rope Hoist Technical Specification | ||||
| Sr. No. | DESCRIPTION | SPECIFICATION | Vendor Specs. If Deviates | Name of the Brand proposed by vendor |
| Standard Scope of Supply:- | ||||
| 1 | Type | Electric Wire Rope Hoist – Single Girder Monorail | ||
| 2 | Make | To be provided by Vendor | SHA8 | |
| 3 | Model No. | To be provided by Vendor | SHA8 | |
| 4 | Load Capacity (Kg) | 1000 | OK | |
| 5 | Travel Height (m) | Approx. 5 | OK | |
| 6 | Travel Length (m) | Approx. 16 | OK | |
| 7 | Lifting Speed (VFD) (m/min) | 1.25~5 or as per manufacturer design | 10/1.6 | |
| 8 | Class of Duty FEM | 2m | OK | |
| 9 | Class of Duty ISO | M5 | OK | |
| 10 | Reeving | 2/1 | OK | |
| 11 | Height Of Clear Lift (m) | 5 | OK | |
| 12 | Wheel Base (mm) | As per manufacturer specs To be provided by Vendor | 180-400 | |
| 13 | Hoist Weight (Kg) (Approx.) | As per manufacturer specs To be provided by Vendor | 300 | |
| 14 | Cross Travel Speed (m/min) | 25/6.25 | 20/5 | |
| 15 | Wheel Diameter (mm) | As per manufacturer specs To be provided by Vendor | 100 | |
| 16 | Rope Diameter (mm) | 6.0 | 7 | |
| 17 | Runway Beam Width (mm) | Approx. 310 mm | OK | |
| 18 | Head Room (mm) | Acc to manufacturer specs.( Not more than 600 mm) | 470 | |
| 19 | Ambient Temperature (°C) | 50 Max | OK | |
| 20 | Application | Indoor | OK | |
| 21 | Voltage | 415Volts, 3 Phase, 50 Hz, AC Supply | OK | |
| 22 | Control Supply | 24 Volts , DC Supply | OK | |
| Lifting Motor Specification:- | ||||
| 23 | Power (kW) | As per manufacturer specs To be provided by Vendor | 3.2/0.45 | |
| 24 | Thermal Insulation Class | F - Class | OK | |
| 25 | Enclosure | IP 55 | OK | |
| 26 | Brake Type | Electromagnetic Disc Brake | OK | |
| Travel Motor Specification:- | ||||
| 27 | Power (kW) | As per manufacturer specs To be provided by Vendor | 0.37/0.1 | |
| 28 | Thermal Insulation Class | F - Class | OK | |
| 29 | Enclosure | IP 55 | OK | |
| 30 | Brake Type | Electromagnetic Disc Brake | OK | |
| 31 | Gear Box | Enclosed type Helical gear, Oil splash lubricated, Make To be provided by vendor | OK | |
| 32 | Hook | Single shank Swivelling type. | OK | |
| 33 | Control Panel | Electrical device of Contactors and MCB mounted in hoist panel box. (Thermal overload relay to be provided) | OK | |
| 34 | Over Travel Limit | Rotary Limit Switch | OK | |
| 35 | Over Load Protection | VFD (Electronic) | OK | |
| 36 | Connectors | Plug In type for all electrical accessories | OK | |
| 37 | Paint | As per manufacturer specs. | 3 | |
| 38 | Connectors | Plug in type for all electrical accrssories | OK | |
| 39 | Electrical supply | DSL (Shrouded Bus bar GI conductor 40 ohms) | OK | |
