Lh Type Electric Hoist Double Girder Beam 20ton Overhead Grabbing Crane Eot Crane for Workshop

LH Type Double Girder Overhead Crane is a kind of standard cranes, which is designed for general material handling purpose in production line and workshop, these cranes are available with installation on the new or existing buildings like other kind of factory cranes, it is best in functionality, versatility and convenience.

Girders

 1.Module design

 2.Material: carbon steel with high quality of Q235B or Q345B

 3.The main girder is connected by strength bolt.

 4.2 main girders are welded box type

 4.Weld joint tested by X ray or ultrasonic examination;

 6.Designed Deflection≤1/800 of span

Painting

 1.First layer of coating epoxy 30 microns

 2.Second layer of coating epoxy 30 microns

 3.Third Layer of coating of polyurethane 40 microns

 4.Corrosion protection through rust removal by mechanical shot blasting SA 2.5

 5.Average thickness: about 100 microns

 6.Color: yellow, orange or as per your requirement

Double C-track Festoon System

 1.Flat cable for strong life.

 2.Electrical box has indication of working.

 3.4mm thickness national standard track pull and push wheel with sealed bearing

 4.This double C-track festoon system makes the driver separated from the hoist, thus give a maximum safety protection.

Other important parts of double double girder overhead cranes

The process of producing