Inquiry about CD1 electric wire hoist 10T lifting hight-6m from Slovenia

Keyword:CD1 electric wire hoist 10T   Time:2021-6-2 15:58:12

日期:

20151116 上午12:41

Hallo Mr. Yang !

Please for the prospects for chain hoist or Wire rope hoists, too.

Thanks

__________                                                     

Otmar Bedenk

 

11/16

Dear Otmar Bedenk

Thanks for the reply.

We supply both chain hoist or wire rope hoists.

Attached techincal brochure.

Await for your comments.

Best regards

Yang

 

11/18

Dear Mr. Yang !

Thank you for the data drawings. Do you have a double speed (frequency regulated speeds) of chain hoists and wire rope hoists ? Hoists could be with hand and motorised trolleys.

Next time we will send you our request for your offer.

 

11/18

Dear Otmar Bedenk

Yes, we have.

Thanks and await for your request next time.

Best regards

Yang

 

4/21

Dear Sir !

Please for your offer for XCD1 electric wire hoists:

A. Inside ambient: +40, -10 deg.

1 piece, electric wire hoist type XCD 110S: classification 2m acc. to FEM

Technical data: capacity-10t, lifting hight-6m, lifting speed-8/1.3 m/min-two speed, traversing speed-20/2m/min (frequency regulation)

B. Outside atmosfere (see side ambient): +40, -10 degr., IP65

-1 piece, electric wire hoist type XCD 110S: classification 2m acc. to FEM

Technical data: capacity-10t, lifting hight-10m, lifting speed-8/1.3 m/min-two speed, traversing speed-20/2m/min (frequency regulation)

Ask for price FCA Ljubljana, Slovenia, and the shortest delivery time.

 

Please for the prospect with dimensions of your chain hoists.

 

For your prompt offer we in advance thank you.

 

 

Please for your offer for CD1 electric wire hoists:

A. Inside ambient: +40, -10 deg.

1 piece, classification 2m acc. to FEM

Technical data: capacity-10t, lifting hight-6m, lifting speed-8/1.3 m/min-two speed, traversing speed-20/2m/min (frequency regulation)

 

B. Outside atmosfere (see side ambient): +40, -10 degr., IP65

-1 piece, classification 2m acc. to FEM

Technical data: capacity-10t, lifting hight-10m, lifting speed-8/1.3 m/min-two speed, traversing speed-20/2m/min (frequency regulation)

 

 

image001.png

FEM  2m标准对应的是我们的M5标准。

image003.png

IP 54 第一个数字5,看左边的表格,第二个数字看右边的表格,也就是防尘,防溅水。

QD 小车的是IP55,这种的,我们是IP54, IP65 做不到

 

4/22

Dear Otmar Bedenk

Would you pls confirm below:

1, it is used in single girder or double girder? Attached difference.

2, Power supply.

Await for your reply and I will work accordingly.

Thanks and best regards

Yang

wire rope hoist (lifting body) + electric trolley---single girder used.JPG

wire rope hoist (lifting body) +double girder trolley----double girder used(2).jpg


4/22

Dear Sir !

All hoists:

I- beam, b=300mm.

3x380V, 50Hz

Best regards

 

4/22

Dear Sir !

All hoists:

I- beam, b=300mm.

3x380V, 50Hz, 1. 5m-pending tablet control conn.to hoist, 2. radio remote control (our obligation)

 

4/22

Dear Otmar Bedenk

Then it is used in single girder, the I-beam width (flange width) is 300mm.

Best regards

yang

 

4/23

Dear Otmar Bedenk

May I know our normal level M3 (1Bm), IP44 is ok for you? It could be used in most of environment.

Thanks and best regards

yang

 

4/24

Yes, for inside crane the 1Bm and IP44 shall be comply, but for outside crane shall  the min. IP55 and 2m be required.

 

4/25

Dear Otmar Bedenk

Is IP55 and M4 (1Am) ok for outside crane?

Thanks and best regards

Yang

 

1: 可以做到IP55,价格跟IP54 一样,只能做到M3,国内的都是M3,有人说M4,实际上也是M3,欧式能达到M5

2:可以做到IP55说实话吧, 对于葫芦来说,其实国内的标准99%都是M3的标准,除非电机做的特别好的话,才能达到M4的工作级别。 但是使用是没有问题的, 因为我们的葫芦出厂前都会做1.25倍的静载实验和1.1的动载实验的。 正常情况下我们出口的话, 铭牌是M4的,欧式的标准是M5的工作级别

3 IP54IP55我昨天问了**他们说做不了,只有欧式能做55),问过**了,他们最高只能做到M4只有欧式的可以做到M5,主要是电机的问题(南京总厂) 


4/25

O.K. IP55 for this case, bat 1Am is low  in this case (better would be 2m).

 

Please , send us your offer essential.


4/25

Dear Otmar Bedenk

A. Inside ambient: +40, -10 deg. IP44

1 piece, electric wire hoist type XMD 110D: classification M3(1Bm) acc. to FEM

Technical data: capacity-10t, lifting hight-6m, lifting speed-7/0.7 m/min-two speed, traversing speed-20/2m/min (frequency regulation)

3988 US $/unit

B. Outside atmosfere (see side ambient): +40, -10 degr., IP55

-1 piece, electric wire hoist type XMD 110D: classification M4 (1Am) acc. to FEM

Technical data: capacity-10t, lifting hight-10m, lifting speed-7/0.7 m/min-two speed, traversing speed-20/2m/min (frequency regulation)

4410 US $/unit

The price is base on CFR Ljubljana, Slovenia (would you pls change FCA term to CFR term, thanks)

delivery time. 20 days.

Attached technical brochure.

This type of hoist could not be made to M5 due to the design, it is old, reliable one with its low price, the Europe type could be made to M5 but price is much higher.

Best regards

yang


5/10

Dear Mr. Yang !

Thank you for your interest. We are waiting on the decisions of our clients.

 

5/12

Dear Mr. Yang !

 

When the supply of the winch,we must get from you the following certifications:

- Guaratee of el. wire hoist

- Declaration of conformity acc to EC (2006/42EC, 2004/108/EC, 2006/95/EC)

- Test certificates for hois, hook and Wire rope acc. EN. FEM

- Technical description, instructions fo use and maintenance (slo or english language)

 

Whether it's from you, you can acquire them?

 

5/12

Dear Otmar Bedenk

Yes, we can supply these along with the goods.

Guarantee: 1 year

 

5/12

Thank you for a positive and prompt answer.

 

11/9

Dear Otmar Bedenk

Below is the updating price of our Vital type chain block

1-ton, 3-meter: 28US$/unit

2-ton, 3-meter: 40US$/unit

3-ton, 3-meter: 45US$/unit

5-ton, 3-meter: 68US$/unit

The price is based on FOB china.

Guarantee: 3 years

Best regards

Yang

 

11/9

Thank you for your information. But we need the prices and delivery time on our market-Slovenia.

Best regards

 

11/9

Dear Otmar Bedenk

Vital type chain block

1-ton, 3-meter: 29US$/unit

2-ton, 3-meter: 41US$/unit

3-ton, 3-meter: 46US$/unit

5-ton, 3-meter: 69US$/unit

The price is base on CFR Ljubljana, Slovenia

Delivery time: 20 days.

Best regards

Yang

 

4/14

Yes. Thank you for received.

This moment we have not any questions for chain hoists.