16t Trolley Type single speed CD1 Building Construction Tools Lifting Machine Electric Wire Rope Hoist

Model CD1 Electric Wire rope Hoist has only one normal speed, which can satisfy normal application. Model MD1 Electric Wire rope Hoist provides two speeds: normal speed and low speed. At a low speed, it can do precise loading and unloading, mounding of sand box, maintenance of machine tools, etc.

Detailed description of CD1/MD1 Electric Wire rope Hoist

Motor

 Hoist motor is a taper type rotor with braking, our motor is one of the best quality motors, it has bigger torque. So it can be adapted to move frequently.

Gear Box

Hoist gear box has specially treated gears for high wear resistance. Each geared  shaft assembly is supported on ball roller bearing, to ensure smooth, low-friction operation.

Rope Drum

Grooved drum, seamless pipe of adequate length to be wounded in one layer and to  provide proper support for the rope to minimize abrasive wear. Drum shaft resolves on ball bearing for ensuring smooth running.

Wire Rope

Hoist rope complies with the exporting ISO standard. The leading rope taken by the drum, does not slip side way when slack. The factor of safety, on the nominal breaking strength of the rope is six.

Rope Guider

Rope Guider is in two halves, ensuring easy accessibility. It encircles the drum completely so that the rope may not uncoil even when the hoist is unloaded condition.

Hook

Hook are strong and unbreakable.

Other accessories of CD1/MD1 Electric Wire rope Hoist:
Remote control: can be an additional option of pendant control. 
Electric Trolley: When the electric hoist need to move on the girder from left and right, electric trolley must be applied

Packing & Delivery of CD1/MD1 Electric Wire rope Hoist
Packing: Packed bubble film first, then put in to the wooden crate
Delivery: by express, by sea, by air