2 Ton 2tx6m CD1/MD1 380V Electric Wire Rope Hoist Electric Cable Hoist Winch Price

Keyword:Electric Cable Hoist Winch   Time:2019-2-26 8:50:38

CD1/MD1 Electric Wire Rope Hoists11-1.jpg

Advantages of Electric Cable Hoist Winch
 1. The CD1 type and MD1 type steel-wire rope type electric block is a kind of small and light hoisting equipment and it can install on the overhead crane, gantry crane and cantilever crane. If we change a little, it can be used as winding.
 2. The equipment is one of the common hoisting equipment which is used in factory, mime, harbor, warehouse, freight yard and store. It can improve the efficiency of labor and it is the necessary machinery to promote working condition.
 3. The lifting speed of CD1 type electric hoist is ordinary speed and it can meet the common requirements. There are two kinds of lifting speed for MD1 type: ordinary speed and low speed.
 4. When it works in low speed, it can meet the equipment of precious loading and unloading and delicate testing. As a result, the MD1 type electric hoist is much more widely than the CD1 type electric hoist in using.
 5. The products are appropriate for operating in safe environment which is without fire disaster, explosion hazard, corrosive medium and dust. It adapts to the temperature between -20 to 40 degree Centigrade, humidity less than 85% and altitude less than 1000 meters. The adapter power is ac three phase, 50 HZ, 380 V (special voltage and frequency according to order requirements), the classification group is M3 to M4.
 6. For meeting the requirements of larger tonnage, our company also supplies  HC20T, 32T electric hoist. 

CD1/MD1 Electric Wire Rope Hoists11-2.jpg

Detailed description of Electric Cable Hoist Winch
 1. Reducer
   Third-class dead axel helical gear transmission structure is adopted; gear and gear axel are made of heat treated alloy steel; case and case cover with precise assembly and good seal are made of quality cast iron. The reducer is independent, so it’s easy to load and unload.
 2. Control Box
   It has device with up an down stroke protection of break off limiter and can cut off main circuit in an emergency, which ensures safe operation of electric block. Electric elements are of long service life and operational safety.

CD1/MD1 Electric Wire Rope Hoists11-3.jpg

 3. Steel Wire Rope
    It uses GB1102-74(6*37+1) hoist steel wire rope which is durable in use.
 4. Conical Motor
   The hoist motor uses conical motors of relatively stronger starting torque to brake asynchronous motor and does not  need extra arrester. The motor’s load duration factor is 25%; the motor uses B frade and F grade insulation and its grade of protection is IP44/IP54.

CD1/MD1 Electric Wire Rope Hoists11-4.jpg

5. Button Switch
   Its hand-operated, easy to handle, and has two modes of cord operation and cordless remote control
6. Hooks
 Load hooks are heat treated and fracture resistant. In case of dangerous overloading or abuse, the hook does not fracture but will slowly yield.

CD1/MD1 Electric Wire Rope Hoists11-5.jpg

 7. Power
 Operating voltage 220-440V, 50/60Hz, 1-3 phase.
 Low voltage control 36V is standard.
 High efficient energy-saving motor, asbestos free brake system. 2-speed motor is available.
 Sturdy pole change motors with cylindrical rotors and integrated safety brakes.
 8. Limit Switch
 Limit switch devices are fitted at both top & bottom ends, switch off power automatically to prevent load chain from running out.
 9. Pushbutton Switch
 Pushbutton switch is rain-proof plastic for severe impact and corrosive atmosphere resistance and mechanically interlocked.
10. Hoisting Gear:
 Light weight gear units with silent running flat bevelled gears deliver the torque required.

CD1/MD1 Electric Wire Rope Hoists11-6.jpg

 Detailed display of Electric Cable Hoist Winch

CD1/MD1 Electric Wire Rope Hoists11-10.jpg

CD1/MD1 Electric Wire Rope Hoists11-9.jpg