15t Railway Mechanical Jack Lift Rack Jack Track Jack

Production Introduction of Track Jack
 Rack up the machine is mainly used for railway track laying and maintenance. In industrial and mining enterprises and the bridge erecting operation is widely used for lifting and supporting the installation of various weights, and equipment.
 Double-lever sockets for jacking in close quarters.
 Multiple-tooth pawls for strength & safety.
 Drop-forged, alloy steel, heat-treated components.
 Adjustable spring links.
 Plated springs to resist corrosion.
 Precision machining throughout.
 Large base insures a firm foundation.
 Supports full rated capacity on the toe or the cap.
 Steel lever bars sold separately.

Feature of Track Jack
 · Extra wide base for maximum stability
 · Electrically welded base and cylinder assures strength and eliminates leaks
 · 200°handle socket for operation from any direction
 · Load can be applied to toe or head
 · Capacity rated at toe and increases if load applied to head
 · Complete with overload protection
 · Not affected by temperature extremes
 · Tested to over 150% of rated capacities

Application
 1. Improve - track jack should be smoothly completed, with a length of 1.5 m steel steel rod inserted into the rocker arm hole, up and down reciprocating throw to the need of hoisting heposition.
 2. Slow down - turn slowly drop control handle up to brake position will lever up and down throw, every reciprocating or drop a tooth.
 3. Drops - pull lever, with leverage vertical impact downhill baseboard end surface, can be a down to the starting