Technical proposal for Vacuum Slab lifter Model No. PPD-PT350/2

Technical proposal for
 Vacuum Slab lifter
 Model No. PPD-PT350/2

Profiles:
The machine was designed for slab handling indoors use. By compressed air powered, which allow the machine able to use for moist or wet slab surface while applied sawing or cutting machine, special made suction cups ensure a firm and effective attachment with all kind of slabs surface including flamed, Lchiseled, scratched even structured stone surface. The roller bearing design with air cylinder application help operator to tilt the slab between vertical and horizon easily with comfort.

Main Specifications:

• Maximum load: 350kg Maximum lifting height: 1700mm

• Powered by: compressed air, air pressure no less than 5bar

• Vacuum by: Air ejector, air pressure no less than 4 bar

• Main dimensions: 1200*965*750mm

• Vacuum cups: 2*250-450mm

• Tilted by :Air Cylinder

• Tilting control by : Roller control, speed sensible

• Vacuum switch by: manual valve, with fault-prevent lock

Main parts

• Steel frame: Good quality steel pipe of 60*60*6mm in stable welded and screwed as main beam, the Length of main beam was 1200mm

• Vacuum Ejector: Airbest Brand, Model No. ABM20，maximum vacuum flow 160L/Minite, Max vacuum level up to -85kpa, air consumption  65-85L/m, required air pressure 5 bar or above,

• 2 of suction pads with buffer spring, cups sized of 300*500mm, mounted on the Main beam, the cups made by aluminum alloy 6061T, with high flexible sponge rubber as sealing ring, suited for structured or scratched slab surface. The unit cup suction force is 720kg, rated loading 180kg for vertical.

• An integrated safety tank with main beam and a Non-return valve to ensure a long keeping time in case power failure.

• A “Red-Green” vacuum meter mounted in front of device.

• A 3/2 way hand switch slide valve with safety lock knob used for manual controlling the “Suction-Release”,

• An air cylinders worked as tilting unit with bearing rotation unit for tilting from 0-90º, the control lever for tilting was sensible by human sense, the cylinder piston diameter was 100mm, maximum pushing force 315kg(compressed air pressure 4bar)

• 2  of 2/2 way hand valve used for switch on/off the sides suction pads while small panels need to be handled

• An air control valve for switch on/off the compressed air..

• A guide lever with its degree adjustable, its length 650mm

• Drawing:

   Quotation: $ 1,485.00
   Terms of  Payment: NET before consignment
   Terms of Trading: FOB china
   Leading time: approx. 1 weeks after receipt of order