Main Specifications and components of Vacuum Glass Lifter Robot (VGL 800)

Technical proposal for
 Glass Installation Robot
 VGL800
  

Dear Customer,

We thank you for your enquiry and pleased to offer on the basis of our machine specification, sales condition and delivery items as bellow:

Standard Glazing Robot         Model No. VGL800                           1 set

Main Specifications:

1. Maximum load: 800kg while the second ram back to end, 500kg while the second ram extended

2. Maximum lifting height: 3600mm from ground to the centre of the suction frame

3. Moving: automatically moving, speed control by manual roller sensibly

4. Lifting control: with hydraulic ram, controlled by sensible speed roller

5. extension control: with hydraulic ram, controlled by controlled by sensible speed roller maximum extension distance 800mm, maximum extension distance from the front wheel to the suction pads was 1630mm( the ram in parallel with ground)

6. tilting control: with hydraulic ram, controlled by sensible speed roller, the maximum tilting degree near to 130 degree

7. rotation control: with rotated hydraulic motor, controlled by sensible speed roller, the maximum rotation was 180 degree, 90 degree at both sides

8. Side moving: with hydraulic ram, controlled by sensible speed roller, 75mm for both sides, totally 150mm

9. side turning: with hydraulic ram, controlled by sensible speed roller, about 22.5 degree for both sides

10. self weight: about 1250kg with counterweight, 850kg without counterweight

11. Power: DC 24V

12. Driven unit: the front wheels driven with mechanical differential worked as driven unit, rear wheels worked for turning

13. Wheels: 450mm*200mm *2 PU filled solid wheels in front, dual of 400mm solid wheels in rear

14. Driven unit power: DC 24V, 2.2 KW

15. Hydraulic station power: 1.2KW

16. Battery: 12V,150A*2

17. Maximum working period: about 20 Hours

18. Minimum Dimensions: 2200*920*1700mm

19. Charging power:110-220V

20. Charging time: about 5 hours

21. Vacuum system: Dual pump and dual system with 6 round suction pads, pad diameter 400mm

22. Over-load sensor: the sensor will detect the loads weight, once overloads detected, the extension and lifting function will be limited by electric lock.

 Main components in vacuum system:

1. Vacuum Pump: CV-35, DC 24V, maximum vacuum flow 35L/minute, maximum vacuum pressure  -85kpa

2. 6 of suction pads of dia.400mm, the suction pads were designed with buffer spring, mounted on the cross beam with retainer

3. The safety tank was designed independently, and a Non-return valve mounted safe tank to ensure a long keeping time.

4. A “Red-Green” vacuum meter mounted in front of device.

5. A Digital vacuum switch to detect the vacuum level, the switch control the vacuum starting/stopping point for power save, the preset parameter of switch was starting at -60kpa, pausing at -70kpa.

6. A 3/2 way hand switch slide valve in each vacuum system that used for manual controlling the “Suction-Release”

7. The Red-green vacuum meter mount in front of the operator to make sure the vacuum system status in sight

8. The device has an integrated warning unit EW0 with acoustic signal. If the vacuum drops below 60% a howler starts.

9. Red-Green light mounted on electric box for showing device working status, red for alarm, and green for power through, in case the power failure or vacuum level drops down below the required level 60%, the warning system will start automatically with sound and light.

The lifter was designed for transportation or handling the materials at:
   Max.carrying capacity: 800kg at vertical (60% vacuum level)

Options:
 1. Cable-less and sensible Remote control in the range of 30 meters
 2. Suction pads for shaped materials on request
 Dimensions drawing:
 Pls see the attached drawing
 Applications: Standard lifter

 Control panel

Loading graph:

Technical drawing for Vacuum Glass Lifter Robot 800kg

Price: 

   Terms of Payment: 50% payment in advance, balance against the copy of BL
   Terms of trade: FOB China (Package included)
   Delivery time: approx. 6 weeks after receipt of order