​Causes and Solutions of Glass Lift Blocking

Causes and Solutions of Glass Lift Blocking
 In the daily use of glass lifts, there are always a variety of problems, often confusing buyers. For example, glass lifting sometimes encounters various problems, such as abnormal noise, jamming and so on. How should we deal with them? The structure of glass lifting is not complex, as long as we are familiar with some of the following common sense, we can quickly troubleshoot. Now let's see how to change the jam of the glass elevator.            

Causes of jamming of glass elevator:           
 1.  Deformation or damage of glass mud tank           
 2.  Loosening of fixing screw of glass elevator           
 3.  Deviation of Guide Rail Installation Position of Glass Lifter           
 4.  Damage of glass elevator           
 Solutions to the jamming of glass elevator:           
 1.  Cleaning/Replacing Glass Mud Tank           
 2.  Open the glass installation screw and adjust the glass position.           
 Every part needs regular inspection and maintenance, and glass elevator is no exception.
 With the rapid development of China's transport industry, the production of glass will be greatly increased, the demand for glass elevators will be greatly increased, and gradually become the standard configuration of some parts. Glass elevator is an accessory to realize glass lifting movement in transportation system. It is a special component to adjust the opening size of glass windows. Its function is to ensure the smooth lifting of glass and smooth opening and closing. But after a long time of use, the glass elevator occasionally appears murmur, and then we will bring you the solution to this problem.           
 If there are small debris or burrs on the worm gear or worm, the noise will be eliminated naturally after cleaning up; if the worm is machined incorrectly, it can not match the worm gear; this situation can only scrap the worm, and there is no better way to remedy it. The magnetic steel sticking position in the  casing is not good or there is foreign body on the magnetic steel: the solution is the same as above, as long as the attachment is cleaned up, the noise will be eliminated naturally.           
 Generally speaking, if there is abnormal noise when the machine is lifting, it is usually because the dust in the rubber guide groove is gathered and dirty. This will increase the resistance to rise and fall, thus making a squeaky cartoon sound. It's very simple to solve this problem. Just wet the dishcloth with water, wrap it in one end of the chopsticks, and then fix it with a rubber band. Then put this end  into the glass guide groove and slide back and forth to clean it, so that the guide groove can be thoroughly cleaned. As the resistance decreases, there will be no noise when the windows are switched on and off.
 Here are three common glass lifts.           
 1.  Belt-type glass elevator: The flexible shaft of the elevator is made of plastic perforated belt, and other parts are made of plastic products, which greatly reduces the quality of the elevator assembly. The transmission mechanism is coated with grease, which does not need to be maintained in the use process, and the movement is stable. The position of the rocker handle can be freely arranged, designed, installed and debugged.           
 2.  Single-arm glass elevator: The transmission mechanism of arm glass elevator is gear teeth plate meshing transmission. The main components except gears are plate structure, which is easy to process and low cost. At present, it is widely used in domestic vehicles. However, because of its cantilever support structure and gear plate mechanism, the working resistance is larger.           
 3.  Flexible glass elevator: The transmission mechanism of flexible glass elevator is geared flexible shaft meshing transmission, which has the characteristics of "flexible type". Therefore, its setting and installation are more flexible and convenient, its structure design is more simple, and its own structure is compact, and its overall quality is light.            Electric glass elevator is mostly composed of motor, reducer, guide rope, guide plate, glass installation bracket, etc. Due to the different material or manufacturing process of the guide rope, there are three kinds of electric glass lifts: rope wheel type, flexible shaft type and plastic belt type. The first two are using steel wire rope as guide rope, and the second is using plastic belt as guide rope.