​How to install a floor scale

How to install a floor scale（2）?
 5.  Wiring
 In the floor scale system, the application of a large number of wires and cables shall be designed in accordance with the relevant requirements for wiring. In the specific installation process, wiring shall be carried out in accordance with the following principles:

(1) single weighing station. The structure of the system is relatively simple, and the adjustment of various parameters has been done before leaving the factory is abandoned. Therefore, in the specific boundary process, only the relevant standards need to be followed, that is, the system should be installed as a whole without additional wiring operation.

(2)  double weighing stations and multiple weighing stations. For the double floor scale platform truck floor scale, there are 6 sensors and 1 7-hole junction box. The junction box is located on the first section of the floor scale body. There are 4 sensors in the first section. Special attention should be paid to the  fact that when multiple sensors are connected, the cable should be of the same length, and should not be shortened or lengthened at will.

(3)  work after the cable is connected. After completion of work in the cable connection, the main purpose of the follow-up work to prevent the cable loss problems in the operation process, so the working content of the process for all kinds of lock nut of screw down system, especially for terminal block, the need to make sure that in the process of the operation of the system, the cover plate has high sealing, so need to operate in strict accordance with the relevant standards. In addition, for the instrument, a special signal line should be applied, which should be inserted into the metal pipe and connected effectively with the instrument interface.
(4)  power cord connection. During the operation of the system, a variety of auxiliary facilities will be connected. In order to reduce the complexity of the system, multifunctional terminal board can be applied to realize effective power supply for these devices.

 6  Concludes

 During the installation of the floor scale, it is necessary to pay attention to the site selection of the road and the construction of road facilities. In order to ensure the normal and stable operation of the equipment, it is also necessary to carry out the construction and construction of relevant auxiliary roads. At the same time, during the installation of the equipment, construction shall be carried out in strict accordance with the construction drawings, and necessary lightning protection measures shall be installed to improve the stability and safety of the equipment operation.

 In essence, floor scale mainly refers to large-floor scale weighing device. Its working principle is to use pressure sensing parts to adapt resistance, calculate current changes, display digital ammeter with current changes, and then form a good data change analysis. On the floor scale, the corresponding weight value is calculated mainly through the transformation of the electronic current, and the induction effect of the current is calculated by using the change of the current.