​Correct use method of electronic crane scale

Correct use method of electronic crane scale
 Electronic crane scale is widely used in industry at present, recently more and more customers come to ask us about the various functions of electronic crane scale and the use of the guide. Many customers have more or less problems after purchasing electronic crane scales. Judging from the customer's problems, we believe that many problems are caused by the failure to properly use electronic crane scales. So we will share with you today, the correct use of electronic crane scales.
 When installing or replacing the battery, tighten the lock screw of the battery holder, check whether the battery holder is firmly fixed on the scale body, and then close the door of the hook scale to prevent accidents. When the meter shows low voltage, the battery pack should be replaced immediately and the replaced battery should be charged in time to prevent battery damage. When the battery pack is not in use for a long time, it should be recharged at regular intervals. The battery should be stored in a dry and ventilated environment with appropriate temperature, and avoid contact with corrosive substances. When loading and unloading battery pack connection line aviation socket, do not use the hand to grasp the clamp wire cap clamping wires, and should grasp the base, on the other side of the transmitter on the aviation plug also do not grasp the clamp wire cap, should grasp the head of the rotating cap loading and unloading, prevent the power connection loose, cause trouble. Before the transmitter is connected to the power supply, the antenna and its feeder must be connected reliably, otherwise the transmitter will be damaged.
 Internal electronic crane said many electronic components, such as integrated circuit, quartz crystal, sensors, monitors, etc., when there is intense collision of electronic crane scale, can damage the components, electronic scale caused by fault, affect accuracy so as to affect the normal use, and other items to avoid  scale body collision or falling from high up in the air, instrument to should  take put down gently, don't put randomly, to prevent unnecessary loss, the  instrument fixed on the crane should be taken when using vibration reduction  measures, so as not to affect the reliability.
 In the normal use of electronic crane scale, do not remove the electronic scale parts, do not open the seal on the sensor, remove the integrated circuit and other components on the instrument, necessary maintenance, must be under the guidance of the relevant technical personnel or have a certain maintenance knowledge, to prevent the expansion of the fault.
 Compared with electronic platform scales, electronic crane scales seem to have better accuracy and efficiency. Because the electronic platform scale will often have  errors, because the weight of the object will sometimes have some moisture and  external force, resulting in inaccurate weighing, so the electronic crane is a good solution to this problem. The design of the suspension ensures the accuracy and stability of the numerical value. In general, only need to weigh once, can be very intuitive and quick to get the desired numerical results. So electronic suspension also in the continuous popularity.
 In addition, there are many product categories on the hook scale, which is very beneficial for our selection and measurement. Because the weight of the object is different, so when choosing the hook scale should choose the appropriate electronic scale according to the specific weight, in order to measure the right results.