​The adjustment and repair method of electronic crane scale and the reason of failure

The adjustment and repair method of electronic crane scale and the reason of failure
 Must be in a lot of large factories or steel structure factory buildings are to see some tower crane, gantry crane and so on such a design. How should we weigh some goods when they are heavy?
 This is the use of electronic hoist to complete the weighing process. Gradually with the development of technology, after such weighing tools enter the market, many large factory enterprises use more. And for this way of weighing, hang the scale on the hook, so that the weight will be measured out.
 From different categories, electronic crane scales also belong to this kind of electronic display tools. Of course, it is convenient to weigh goods from such large equipment. In the use of such a crane scale is not the same, according to the type of discrimination can be used after. So in today's technologically advanced world, the key is to bring one of the most convenient tools to some of these manufacturing enterprises.
 Pay close attention to the electronic crane scale is mainly used similar to the gantry crane in the way of suspension to operate. And it's easy to use. In terms of reading, such an electronic display screen is better provided, so it is more convenient for reading, and the measured data is relatively accurate, which has won the trust of customers.
 Electronic crane scales can be generally external calibration, of course, some crane scales also have the function of internal calibration. If the external calibration is carried out regularly, not only the sensitivity of crane scale can be guaranteed, but also the data of crane scale can be guaranteed to be accurate and reliable. However, when the electronic crane scale can not be implemented outside school, should be timely shutdown maintenance.
 The electronic crane scale belongs to the precision electronic instrument, often meets the measurement error big question, therefore needs the calibration, especially before long time does not use must calibrate. But we may find sometimes when calibration to finally, in this case you may be at a loss, send to repair again is very troublesome, today I'll introduce the method of dealing with the fault, so you don't need to find the repair department or too much trouble and annoyance.
 1.  electronic crane scale adjustment and repair method
 (1)  Review the electronic crane scale manual, according to the requirements of the school.
 (2)  Change the installation environment of electronic crane scale or modify the internal procedures, to meet the environmental requirements.
 (3)  Adjust the crane scale to make it in a horizontal state.
 (4)  Before the calibration should make the crane scale show the zero position steadily.
 (5)  Choose the standard weight in line with the accuracy requirements of electronic crane scale for calibration.
 (6)  Maintenance electronic crane weighing system mechanical failure.
 2.  reasons for failure of electronic crane scale
 (1)  Operation error.
 (2)  Electronic crane scale installation environment does not meet the requirements.
 (3)  The crane scale is not level