New 2 Ton Economic electric pallet truck 2000Kg Semi -electric pallet truck

Keyword:Electric Pallet Trucks   Time:2019-11-4 1:15:31

How to Choose pallet Trucks
 1.  Rated lifting weight.           

 When the distance between the center of gravity of the cargo and the front wall of the fork is not greater than the distance between the center of load, the maximum weight of the cargo allowed to be lifted is expressed in tons. When the center of gravity of the goods on the fork exceeds the specified load center distance, due to the limitation of the longitudinal stability of the fork truck, the lifting weight decreases accordingly.             

 2.  Load center distance.           

 When standard cargo is placed on a fork, the horizontal distance from the center of gravity to the front wall of  the vertical section of the fork is expressed in millimeters. For pallet trucks of 1-4 tons, the specified load center distance is 500 mm.            

 3.  Maximum elevation.           

 On the flat and solid ground, when the pallet truck is fully loaded and the goods are lifted to the highest position, the vertical distance between the upper surface of the horizontal section of the pallet truck and the horizontal ground where the pallet truck is located.            

 4.  Inclination of portal frame.            

 Unloaded pallet truck on flat and solid ground, the maximum inclination of the portal frame to its vertical position forward or backward. The function of forward inclination angle is to facilitate forking and unloading cargo; the function of backward inclination angle is to prevent cargo from sliding from the fork when the pallet carries cargo. Generally, the forward inclination angle is 3-6 degrees and the backward inclination angle is 10-12 degrees.            

 5.  Maximum hoisting speed.           

 When the pallet truck is fully loaded, the maximum speed of cargo lifting is expressed in meters per minute. Increasing the maximum hoisting speed can improve the operation efficiency, but the hoisting speed is too fast, which is prone to cargo damage and damage accidents. At present, the maximum lifting speed of pallet trucks in China has been increased to 20m/min.            

 6.  Maximum speed.           

  For an internal-combustion pallet with a lifting weight of 1 ton, the maximum speed at  full load is not less than 17 m/min.            

 7.  Minimum turning radius.           

 When a pallet truck is running at low speed without load and turning full steering  wheel, the minimum distance from the outermost and inmost parts of the body to the turning center is called the minimum outer turning radius and the minimum inner turning radius, respectively. The smaller the minimum lateral turning radius is, the smaller the ground area needed for pallet turning and the better the maneuverability is.           

 8.  Minimum ground clearance.            

 Beyond the wheel, the fixed distance from the lowest point on the body  to the ground indicates the pallet's ability to cross the raised obstacles on the ground without collision. The larger the minimum ground clearance is, the higher the trafficability of pallet truck is.            

 9.  Wheelbase and wheelbase.           

 The wheelbase is the horizontal distance between the front and rear axle centerline of the pallet. Wheel spacing is the distance between the center of the left and  right wheels on the same axis. Increasing the wheelbase is beneficial to the longitudinal stability of pallet, but it increases the length of the body and the minimum turning radius. Increasing the wheelbase is beneficial to the  lateral stability of pallet, but it will increase the total body width and the minimum turning radius.           

 10.  Minimum width of right-angled channel.           

 The smallest width of the passage for pallet trucks to and fro to intersect at right angles, the smaller the size, the better the performance.       


Professional Exporter of Electric Pallet Trucks.jpg     

Ramhoist News
  • No information
Ramhoist FAQ