2000kg Hydraulic Powered Electric Hand Pallet Truck

What are the advantages of manual pallet truck

 Advantages of Manual Pallet truck:

 1. Manual pallet truck is an indispensable auxiliary tool for material handling. Pallet handling is the most portable and the most important thing is that anyone can operate it.

 2. The shape of the rudder handle is suitable, with plastic handle clamp, which makes it particularly comfortable to use. The operator's hand is protected by a strong protector. The lifting, descending and walking control rods can be conveniently controlled by hand.The tray truck is light, safe and comfortable to use.

 3. Torsional steel structure, fork made of high tensile channel steel. The manual fork tip is made into a circle, when inserted into the tray, the tray is protected from damage, and the guide wheel makes the fork inserted into the tray smoothly.

 4. Strong lifting system can meet most lifting requirements and galvanize according to standard requirements. The pump cylinder is mounted on the heavy-duty protection seat, and the cylinder cylinder is chrome plated. Low control valves and relief valves ensure safe operation and prolong service life.

 5. The wheels run flexibly and are equipped with sealed bearings. The front and rear wheels are made of wear-resistant nylon. The rolling resistance is very small, and there are rubber, polyurethane or special tyres for selection. 

 6. Hydraulic systems and bearings need not be maintained at all, but in extreme cases, such as in wet environments or flushing with high-pressure hoses, all bearings are equipped with filling holes for refueling. The service life of manual pallet truck is relatively long, and there will be no trouble in general. Relevant maintenance techniques have a lot of exquisite, the following is to learn together:

 1. Daily inspection and maintenance

 Daily maintenance is indispensable. Maintenance of wheel and core axes and rags should be emphasized. When the handling is finished, the goods on the fork should be unloaded and the fork holder should be lowered to the lowest level. 

 2. Smooth Oil
 In factories, all bearings and shafts have been added short-lived lubricating oil, you only need to participate in lubricating oil for all moving parts during the monthly interval, or every thorough inspection.

 3. Refueling
 Check the oil quantity once a month.

 4. Exhaust
 Because of transportation or inversion of the pump body, air can enter the hydraulic pump very well, which will cause the cargo pressure not to rise when the rising position is suppressed. The arrangement can be made as follows
 Pull the finger down and move up and down several times. The maintenance of manual pallet truck is more complicated, such as checking whether the oil circuit is leaky, checking whether the battery has electricity or not, adding electrolyte, checking whether the driving motor and the pump station are working properly, etc.