Lifting electromagnet introduction and its different usage

Lifting electromagnet｜lift magnet
 The special electromagnet used as the armature is the lifting electromagnet. It works by using electricity and magnetism to absorb ferromagnetic materials. Magnetic materials such as metallurgy, mining, machinery, shipbuilding, transportation and so on can not be reduced by electromagnet lifting tools.

In some fields, it can also be used as electromagnetic manipulator, magnetic alignment, rod length and so on. After many years of popularization and application, the use of hoisting electromagnet has been widely expanded. The lifting structure of the magnet, the distribution of magnetic force and the manufacturing process are different. Therefore, many series of strong target products are also expanded because of the diversity of its suction.
Steel chip lifting electromagnet

MW5 series hoisting electromagnets are suitable for the operation of ingot, steel ball, pig iron, machine chip, all kinds of scrap, chip, bag and waste residue in steel plant. The most important thing is that it is suitable for the iron powder and iron powder of the coal preparation plant. In the slag treatment process, large size iron can be removed at the initial stage. An extra thick mudguard and an anti distortion setting chamber are in the export box. There are three ways of excitation: rated voltage DC220V; strong excitation; over excitation. 

MW61 series lifting electromagnet
The effective loading and unloading of steel scraps on narrow box containers is the working principle of MW61 series lifting electromagnets. Because of its special semicircle structure, the MW61 series lifting electromagnet is called the elliptical electromagnet. As the sizes of the chutes are different, the following samples are for reference only. We can make specific ones according to your requirements.

In fact, there are various kinds of steel chips in "scrap GB 4223-2004", which are divided into heavy, medium, small, aggregate, light and so on. LD can be designed separately. However, we can provide you with the most suitable one to ensure the best performance according to your waste.

Lifting Electromagnet for Steel Billet, Girder Billet and Steel Slab
MW22  Series Lifting Electromagnet

The rectangular series is the most widely used shape, especially it can lift and transport billets, ingots, bloom and so on, and also applies to circular and profiled steel. Different magnetic paths are designed for different steels.

MW42 Series Lifting Electromagnet

MW42 super force series lifting electromagnet can generate powerful attraction force in attached area, which can be used for lifting and transporting billets, girder beam and track beam, and also used for lifting and transporting round billet and profile steel.

Lifting  Electromagnet for High Speed Wire (Coiled Bar)

MW19 Series Lifting Electromagnet
 Because of its light weight, the MW19 series lifting electromagnet has reasonable structure (only two points touching the rod) and is suitable for wire rod. The wire rods with different diameters can match their magnetic poles. When selecting suitable electromagnet, the length of wire rod is very important. It can be run along the length or width of the electromagnet. It can be used alone or with multiple units.

A lifting electromagnet for strapping steel bars and special-shaped steel

MW38 Series Lifting Electromagnet

Because of the unique magnetic circuit, the MW38 series lifting electromagnet has good advantages in heat dissipation and penetration, for example, through multilayer penetration air gap. It can lift and transport bars, flat iron and angle iron without packing or simple packing. The problems of improving large deflection such as round steel and threaded steel are improved. There are two kinds of normal temperature type and high temperature type. Usually, multiple units are used in operation, so the connecting beam adopts two or four connection points. We made two connection points in this directory.

Tube billet and steel pipe hoisting electromagnet

 MW35 Series Lifting Electromagnet

The magnetic circuit of MW35 series lifting electromagnet has deep penetration and is very special. It plays a great role in the hoisting and transportation of billet, steel tube, billet, ingot, ingot and special steel.

MW85 series lifting electromagnet
 The design of the MW85 series lifting electromagnet has a unique magnetic circuit, with an arc rod for lifting and transporting steel pipes. Unlike hoisting hook and wire rope hangers, it can directly load and unload materials directly from the top, and can greatly improve the efficiency of operation. At the same time, it will not touch adjacent pipes to provide safe operation and energy saving.

 Heavy rail steel and the lifting electromagnet of the special-shaped steel

MW17 Series Lifting Electromagnet

The MW17 series lifting electromagnet is a kind of electromagnet specially used for lifting and transporting heavy rail. In the era of rapid development of railway construction, heavy rail has changed to super long and super heavy railway. Some important heavy rail projects have attracted our attention, in order to provide users with ideal products. Our products have been used in professional heavy rail manufactory and large railway track beam factory.

Special magnetic circuit and double clad structure are its characteristics, so that it can heat and penetrate deeper and deeper. Hoisting and transportation of heavy rail, special-shaped steel and shaped blank can be used. It has two different types: normal and high temperature. Usually a number of units work together.
 Hoisting electromagnet for lifting steel plate handling
 In order to complete the heavy steel plate lifting and handling project, we specially designed this series. The advantages of this project are clear: safe, accurate and fast. Transporting some long plates will cause them to be deformed. Multiple units can be used together to solve the problem. For some  boards with a thickness of 6mm to 32 mm, the spacing between the 2 magnets should increase by 2.5 to 3.5m, and the length of each end is half of the space. According to different lifting parts, the series is divided into 350 and 400, 500 and 650.

Medium plate plant, shipyard and machinery manufacturer are all suitable for type 350. It can be controlled and controlled by a magnetic field. It can lift one or more plates at one time. We recommend using type 400 to lift as many pieces as possible at a time. We can also produce less than 700 degrees (high temperature) products for you.
 MW84-35 Series Lifting Electromagnet

 
 MW84-65  Series Lifting Electromagnet
 
 MW04  Series Lifting Electromagnet
 

 Lifting Electromagnet for Coiled Steel
 Coil steel can be used in this series of lifting electromagnets. It can be divided  into three types: vertical, horizontal and ordinary. The advantages are vertical and horizontal lifting. High temperature type hoisting electromagnet should be used in the process of annealing. The material can be lifted vertically or horizontally within the range of 100 to 600 degrees C. The vertical magnet attracts the end face, which is suitable for the binding or binding of the rolled steel. The IDE surface is suitable for the binding of rolled steel.

Electromagnet for turning side hoist
 The lifting electromagnet is recommended for items of up and down inspection and surface finishing. It is also suitable for lifting and conveying thick plates and tube blanks. The material adopts the crane with guide posts to raise the plate about 180 degrees.