There are ten advantages of loading and unloading material for bridge crane

Keyword:bridge crane   Time:2018-12-1 10:57:57

Bridge crane for loading and unloading material
 Today, the most widely used material handling equipment is the bridge crane. No device can be used to move materials safely from point A to point B. It is possible to choose a wide range of bridge cranes, which can be adapted to various environments in many ways. Why are bridge cranes regarded as priceless? These ten advantages are the reasons for its popularity
 1. Bridge cranes can move other devices without clearing the aisles, and do not reach other equipment. Sometimes you don't even get a forklift to clean up the clog on the road and cause a road block. In this case you have to separate other manpower to clean up the passage. At this time you need an elevated bridge crane, so long as you set up a remote control button on the track of the crane, so it can easily bypass the obstacles by running a button station or a radio remotely controlled crane. When handling cranes, your operator can guide around obstacles instead of climbing cranes. With this method, you can no longer worry about obstacles in factories or arrange business around your factory at any time.
 2. The crane can clean the space. There is such a situation that  your floor space is cleared up, so there is nothing to support the bridge crane at this time. Usually, companies that manufacture cranes can design separate  cylindrical designs aligned with building columns or walls. You can choose a new building designed for loading, the ceiling crane, and the other option is  to support the crane from the floor, and if you want to work on some of the support on the floor or on your ceiling, you can use these two machines in combination.
 3. Bridge crane can ensure safety. On cranes, crane operators can choose the best position and safely stay on top to move loads. Because the surrounding structure is inherent, resulting in blind spots of forklift trucks. First, the blind spot will easily dump the forklift, so that the driver can fall off the forklift. Secondly, when the forklift runs, the pedestrians can be hit by a forklift, or the pedestrians and the porters are smashed by a forklift. The above two points are the main cause of the forklift. The advantage of the bridge crane is that it is equipped with a collision avoidance device, so that even if there is a blind spot, it can prevent them from colliding with the same bay or terminal crane during operation.
 4.The bridge crane has strong customization and adaptability. For hooks equipped with cranes, bridge cranes are very versatile, and the types available are infinite. The hanger bar, C hook, weight scale, custom designed lifting tool, manipulator and vacuum lifter are all attachments required for hooks. Sometimes a crane will be equipped with several different hook tools, and the hook can be replaced at any time.
 5. Bridge cranes have heavier payloads. In order to keep your  factory workers away from heavy workload, they can also handle larger loads. When using a forklift, your operator must accept load work, and on a bridge crane, the operator can easily use the above radio or independent move button station, not only does not work and can be out of danger.
 6. Bridge crane allows your entire factory to be covered without dead point. In this way, you will have a great choice when setting up a factory, even if there is no clear channel or channel, and the crane can run on the load.
 7.The operation cost of bridge crane is very low. A crane can work in any case, whether it is a fully manual system requiring energy, or a very economical three-phase system. or there's no need to recharge the battery.
 8. Bridge cranes can help workers work under their working cells. This is an ergonomic work. Nowadays, bridge cranes allow workers to use mobile lifts and other ancillary products to move products instead of manual ones. A mere 50 pounds of load can be obtained by cranes instead of manpower. Operators need only a pound of thrust to use hooks. With the lifting tools such  as cranes, operators can increase productivity and reduce product damage rate during operation.
 9.Bridge cranes can improve productivity. It can play the biggest role in dealing with larger loads and unloading loads from workers. Some work, although the load is relatively light, but the workload is very large, the application of the crane is very large, but in a very short time, the bridge crane is rationalized by the ROI.
 10.Bridge cranes can make the workforce more diverse. The workers in the factory are so many and complex that they are old and small, they have men and women, and some workers can't do the work of manual handling because of their strength. So employers should take account of these reasons, such as the increase in the age of the workforce, including women.

Ramhoist News
  • No information
Ramhoist FAQ