Multi-way adopted to ensure safety of crane use
Keyword:crane Time:2018-12-1 18:04:31
What is the basis for the safety of the crane?
Suppose you are an experienced crane operator, do you have the following ideas?
You have considered all the angles.
You've done it one thousand times.
It's natural to you.
The training you have received allows you to know what you are doing.
Nothing can make a mistake, right?
In the work, all these ideas are damage, we will explain some basic knowledge of crane safety, in order to have a good working condition today.
I hope these can keep you away from danger and help you.
Safety foundation of crane
Understand the rated load of the crane
Never let colleagues work between fixed objects and loads.
Early thinking
Know what your safe working radius is, clearly know the safe driving radius of the crane and contact with power or other dangerous will lead to disastrous consequences.
All the dangerous energy should be eliminated. When you start any maintenance activities, be sure to ensure energy consumption.
It is a dangerous thing to do hoisting. Accidents can still occur when appropriate training, proper maintenance of equipment, employees' safe conduct, and pay attention to other aspects of the safety plan.
These devices did fail because crane operations depended on mechanical devices. When this happens in the ascension event, the result may be disastrous. You are the only one who can control effectly to reduce harm. Your life is in your own hands!
The safety practices of the operators:
All hoist control and brakes should be tested at the start of each shift.
Do not attempt to operate cranes or elevators suspected of being unsafe.
The brake is always tested by short distance to ensure control.
The load is moved only after the designated qualified signal is sent.
Do not carry the goods over the workers.
Never pass the load to the workers (they must make way).
The signer must keep the line of sight with the operator.
The rider is not allowed to stay on the load or hook.
No unauthorized person will be allowed to operate the crane.
It is always locked before the crane is checked or repaired.
Cranes should be checked regularly so as not to be exposed under adverse conditions.
Before lifting the load from the floor, the hook is always positioned directly on the load.
Maintenance of inspection records and documents
Check warning devices and signals before use.
The signaling must pay attention to the load.
Operators must watch the signalers.
Know your route ahead of time before you start!
It's a thing to know about putting down the load!
Will the new position support the weight?
There is a safety practice on the signaling
A signaling man can only have one person.
Keep the line of sight with the operator.
Make sure that the operator confirms each signal.
If the understanding is lost, stop the operation.
Operators must watch the signalers.
Where is the pre - planned load
Knowing the new position will support the weight.
To leave or suspend a hoist or crane
All hooks are raised to no limit switch.
Put all controls in the "close" position.
Put the main power switch in the "close" position.
Visual inspection of any dangerous situation.
If any defect is reported, please report it in time.
Immediately mark defective equipment.
Please report it in time when the crane is not in operation.
The manufacturer's advice should be well followed.
Staying safe at work is not only responsible for yourself but also for your family. Safety is always the first. Enjoy your work while enjoying your life. Experience is not what you talk.
- No information
-
1. Design objective of electronic crane scale network management. (1) Adopt advanced distributed data processing techno…
-
Electronic crane scale bearing platform installation to focus Electronic crane scale can be installed generally on the li…