Notice for using Lever Block Hoist

A lever block hoist is a manual device used to lift, lower, or pull a load and to apply or release tension. It utilizes a ratchet and pawl mechanical configuration to incrementally raise or lower a load or to apply or release tension.
Lever block hoists are mainly divided into several series, they are Lever block Hoist VA Series which is similar to VITAL lever block hoist and Lever block Hoist VG Series which is similar to KITO lever block hoist. Lever block hoists have the advantage of being easy to transport, require minimum set-up, and are a practical option in confined spaces. They are suitable for different applications ranging from heavy-duty construction work to day-to-day maintenance and repair jobs.
 Certainly, there are quite much notice about how to use them.
 Firstly, When should you inspect the lever block hoists?
 1.Schedule a detailed inspection of the hoists.
 2.Follow the manufacturers' recommended maintenance schedules.
 3.Inspect hooks, ropes, brakes and limit switches for wear and damage every working day.
 4.Replace items not operating properly. Tag defective items and remove from service for repair by a competent person.
 5.Post the safe load limit on the hoist.
 6.Inspect the hoist before lifting a load. Check the upper and lower hooks to see that they swivel. Replace any worn chain immediately. Tag any defective chain and remove from service.
 7.Keep chains lubricated.
 Secondly,How should you use a lever block hoist safely?
 1.Hoist from directly over the load. If not centered, the load may swing when lifted.
 2.Hang hoists solidly in the highest part of the hook area. Rigged this way, the hook support is directly in line with the hook shank
 3.When loading the lower hook, place the load directly in line with the hook shank. Loaded this way, the load chain makes a straight line from hook shank to hook shank.
 4.Seat the load properly in the hook.
 5.Move hoist controls smoothly. Avoid abrupt, jerky movements of the load. Remove slack from the sling and hoisting ropes before lifting the load.
 6.Remove all loose materials, parts, blocking and packing from the load before starting the lift.
 7.Make sure everyone is away from the load before starting to hoist.
 Thirdly, What should you avoid when using lever block hoists?
 1.Do not use hoisting equipment for lifting people.
 2.Do not pass a load over workers.
 3.Do not tip a load. The load is unstable and harms the hook and hoist.
 4.Do not insert the point of the hook in a link of the chain.
 5.Do not hammer a sling into place.
 6.Do not raise loads higher than necessary to clear objects.
 7.Do not exceed a hoist load limit.
 8.Do not leave suspended loads unattended
 Lever block hoist is an indispensable tool for lifting and rigging. AS safety use of lever block hoist should be paid more attention.