Teach you to choose a suitable KBK track

Keyword:KBK track   Time:2019-1-6 23:51:28

Now KBK track can be said to be a good  assistant for many industry businessmen. Its excellent performance can bring you more efficient operation. With more and more people using this kind of device, people pay high attention to the technical safety knowledge of this kind  of track. Next, we will introduce you how to choose the equipment, hoping to  help you.

 KBK track can be  divided into many types according to its appearance. This kind of equipment can  be used in conjunction with pneumatic trolley or explosion-proof hand-pulled  trolley to form a movable pneumatic lifting equipment. The most common lifting  method is the wire rope load, of course, there will also be ring chain. This  type of chain is relatively durable, because this type is through lifting. The  lifting mechanism, walking mechanism and valve distribution system are composed  of three parts.
 KBK track can  accurately locate, prevent inaccurate positioning of general lifting products,  at the same time it can arbitrarily control the speed, and ensure the speed of  operation; the equipment is simple to operate, beautiful appearance,  environmental protection and safety, easy to control.

 When using KBK track,  operators should pay attention to the lifting weight should not exceed the  standard load. At the same time, according to the marker's lifting weight, the  handle can‘t be  lengthened casually when used, because the lifting weight of this equipment is  limited, and the force of both hands has different sizes. When using, it is  necessary to check whether the wire rope is worn or twisted. If this kind of  situation occurs, it needs to be replaced in time to ensure the safety of use.
 Key Points of  Technical Safety Knowledge for KBK Track            

 1. The safety  inspection of KBK track can be said to be very important. Professional line  track flaw detection equipment can be used to detect whether there are cracks,  clothing or loosening phenomenon in bolts and splints. If such problems are  found, effective measures must be taken in time, and timely and effective  repair must be carried out.            

 2. The track needs to  be measured and adjusted, especially after installation, according to the  prescribed method.             

 3. When adjusting, we  can use the method of drawing steel wire to help track detect the straightness  problem. Simply put, it is to use a steel wire, and then choose the store  measurement method to determine whether it belongs to a straight line.

 4. For the elevation  of the track, professional level can also be selected to help the measurement  and make effective adjustments.            

 5. The span of KBK  track can be said to be very critical. It is most safe to select infrared  measuring instrument to check, or steel tape to help you test. The relevant  deviation can not exceed the prescribed range.            

 6. ordinarily, the  joint of the track will be made into a direct joint. It may also be made into a  45-degree inclined joint because of the special needs of the businessmen and  manufacturers.            

 7. Long-term  operation may cause certain losses to bolts and fasteners of KBK track. Regular  inspection of the relevant structures of the track reveals that wear and  loosening and other phenomena need to be solved effectively.            

 8. If there is a  small transverse crack in the KBK track, the fish-tail plate can be selected to  connect, and the fish-tail plate needs to be tightened with about 4-6  connecting bolts. If there are longitudinal and oblique cracks, scrap track  should be chosen directly.

 This is the  introduction for KBK track. This kind of equipment has professional advantages  and can provide convenience and security for everyone. So we should pay  attention to the correct method when using it. If you need this kind of  equipment, you may choose a professional supplier to ensure the quality of  equipment.

KBK track1.jpgKBK track2.jpg


Ramhoist News
  • No information
Ramhoist FAQ